Question No top tether anchor point in 2010 Honda Odyssey?

[Unregistered]

I have installed a lot of car seats, but this is my 1st Britax Boulevard ClickTight, purchased Christmas of 2014. I have searched the owner's manual and the car itself, but can find no safe tether point for RF'ing driver side 2nd row. I currently have two boosters in the outboard 3rd row seats, one FF car seat passenger side 2nd row and this will make #4 in the van. Can anyone help?
Posted via Mobile Device

 

[wendytthomas]

No, there generally isn't a place to tether rear facing in an Odyssey.

Your ClickTight is already nearly a year old? The ClickTights didn't allow tethering rear facing after 1/28/15.

Wendy

 

[Dillipop]

They sell an antirebound bar now for the click tight which would negate the need to rear tether it.


Sent from my iPhone using Tapatalk

 

[LISmama810]

You need to create a tether point using the d-ring (a piece of webbing with a loop on one end and a metal ring on the other) that would have come with your seat if it allows rear-tethering. On the 2010 Odyssey, you can loop it around the front seat track. But as mentioned, Britax no longer allows rear-tethering on newer models, so you'd need to determine that.

 

[Nedra]

If the seat was purchased Christmas of 2014, it probably allows RF tethering. So unless you meant 2015, you just need to look through your manual and locate the d-ring to make an anchor point around the front seat track.

If your Britax seat allows RF tethering at all, I think it also allows Australian RF tethering (tethering to the top tether anchor of the vehicle seat it's installed on) which would also work, since that seating position should have a top tether anchor. It's just more of a hassle because the straps are in the way.


Sent from my iPhone using Tapatalk