Hurry need HELP

[Jordynsmama]

I got my seats just now, took them out and I do not see any latch hooks? Arent they supposed to be hanging off the sides like on the box???
They are not there on either seat you guys. What is going on? Am I missing something? HELP!

 

[lovinwaves]

Might help to know which seats these are. Did you look inside the belt paths? Have you taken both seats out of the box?

If you can't find them then call the manufacture in the morning. You might also see if the manufacture has an email, someone might be able to help you tonight if so.

 

[carseatcoach]

Read the manual. Look in the storage pockets.

 

[monstah]

What seat did you buy?

ETA: Looks like everyone is helping at the same time.

 

[Jordynsmama]

Sorry thought most of you saw my thread about the seats. MA nd RA 50. OKay lemme go look in the storage pockets wherever they are

 

[monstah]

Lift the cover up. They are under the cover and in slots under where the kids bum goes.

 

[Jordynsmama]

Yeah umm its hard to believe Im an artificial blonde huh?
Yes they were in the storage under the seat. They are kinda hard to find though unless you know, you read the manual word for word which Im not so good at. lol.
Okay then I got the most rock solid freakin install (the MA) in like 2 seconds with latch. I cannot find a tether anchor or anything to make a loop with either. But that isnt required is it? Safer yes but for now is it okay??

 

[Jordynsmama]

K now Ill do the other seat, then put them in and take pics.

 

[monstah]

Okay then I got the most rock solid freakin install (the MA) in like 2 seconds with latch.

Isn't it awesome!?

 

[capeKO71]

Yeah umm its hard to believe Im an artificial blonde huh?
Yes they were in the storage under the seat. They are kinda hard to find though unless you know, you read the manual word for word which Im not so good at. lol.
Okay then I got the most rock solid freakin install (the MA) in like 2 seconds with latch. I cannot find a tether anchor or anything to make a loop with either. But that isnt required is it? Safer yes but for now is it okay??

Each seat should come with a "D" ring attached to the end of the Tether... you should just loop those around a non-moving part and attach the tether hook... does that make sense? Is that your question? Or can you not find a location to put the D ring? Post your car... someone I'm sure can help find a location for you...

 

[HEVY]

Makes me want to buy a MA just to experience the great install!


OT
When I see Flexlocs in your siggy they make me think of those things they use for handcuffs

 

[Jordynsmama]

Each seat should come with a "D" ring attached to the end of the Tether... you should just loop those around a non-moving part and attach the tether hook... does that make sense? Is that your question? Or can you not find a location to put the D ring? Post your car... someone I'm sure can help find a location for you...

Well the way you worded it and the manual make no sense to me but thats not the immediate issue- its yeah, that I cant find a place to hook it to. There is no anchor that has any circular area. nothing. My old car did, but this one no.
IDK.

 

[simplychels]

Well the way you worded it and the manual make no sense to me but thats not the immediate issue- its yeah, that I cant find a place to hook it to. There is no anchor that has any circular area. nothing. My old car did, but this one no.
IDK.

Can you move either the drivers or passenger side seat up slightly? When I got my new car I freaked thinking I had no versa tether anchor spot, but the seat was just slid too far back blocking the view and access of the seat leg. So I slid it up a few notches and problem was solved.

 

[vonfirmath]

Isn't that install wonderful? I got spoiled by having a MArathon as my first seat, so I hunted and hunted for a good price on the RA50 for my spare. I just could not put up with a harder install after having experienced that (Oh and it doesn't take much longer by seatbelt either)

 

[capeKO71]

Does this help?
[ame="http://www.youtube.com/watch?v=2upADev-UrM"]YouTube - Installing a Rear-Facing Tether Connector Strap (D-Ring)[/ame]

and here (like 1/2 way through the video... just ignore the "helps with recline angle" comment... )

[ame="http://www.youtube.com/watch?v=SuZQp_xij_w"]YouTube - Installing a Rear-Facing Britax Convertible with Tether[/ame]

 

[SavsMom]

I love the install on Marathon and Boulevard...so easy to get them in nice and snug in no time. Welcome to being spoiled by easy installs

 

[wyomommyx3]

I love that install. We have a MA, a RA 50, & a Frontier. I was scared about all the Frontier install problems, but that installed just as easy in our car.

Gotta love a Britax... welcome to the dark side