Question Multitech install help with Honda Odyssey

molly&elle

New member
NEW pics of another install-Multitech install help with Honda Odyssey

Please see my post further down (post 12) and critique my install!! thanks!


My MT just came! 2 questions so far
1. the seat belt stalk is long can I not use the belt lockoffs? see pic
IMG_3291.jpg


2. Is there a place to tether in my van? (or do I just look around the driver seat? if so I use both tehters and loop?)
there's no track
IMG_3292.jpg


so I did this, is that ok? (I think I did it right)
IMG_3295.jpg

IMG_3294.jpg



thanks!

here's the seat!
IMG_3296.jpg
 
Last edited:
ADS

gsdguenter

Well-known member
1. You can twist the buckle stalk up to three times around to shorten it and this might help. Also, the lock-offs are not required. I actually get a better install in my car without the lock-offs.

2. I'm not quite sure what your are referring to with the tethers. You need to attach one tether around each seat track and then buckle the tethers onto each of those. Hmmm, I'm not very good at explaining things lol, but do you know what I mean? The pictures in the manual are pretty good I think. If you want I can post pictures too of what mine looks like.

3. I found it helpful to attach the tethers loosely, install the belt with the belt, then get the foot prop in the right place, then really tighten the tethers hard. This will help you get the foot prop really snug and in the right place, kwim.

Just post if you need help installing it :D You'll HATE it at first and then get used to the way it installs and :love: it.
 

hrice

New member
To gain more leg room you can put a rolled towel or pool noodle in the seat bight. That will keep the seat base from slipping into the bight. I had to do that in my Yukon.
 

molly&elle

New member
1. You can twist the buckle stalk up to three times around to shorten it and this might help. Also, the lock-offs are not required. I actually get a better install in my car without the lock-offs.

2. I'm not quite sure what your are referring to with the tethers. You need to attach one tether around each seat track and then buckle the tethers onto each of those. Hmmm, I'm not very good at explaining things lol, but do you know what I mean? The pictures in the manual are pretty good I think. If you want I can post pictures too of what mine looks like.

3. I found it helpful to attach the tethers loosely, install the belt with the belt, then get the foot prop in the right place, then really tighten the tethers hard. This will help you get the foot prop really snug and in the right place, kwim.

Just post if you need help installing it :D You'll HATE it at first and then get used to the way it installs and :love: it.

there's no runners :( So I looped around the driver seat per manual, jsut checking this is right. I gotta run to pick dd1 from school so quick installing the MR! be back in a bit
 

mykidsmylife

Well-known member
What I mean is the big tan covering that goes from one leg to the other in the shape of a c? There should be somewhere under that to tether if you can get it off! I am not to sure about tethering to the seat like you have it! Now I wanna go fond the manual online!

Sent from my iPod touch using Car-Seat.Org
 

hrice

New member
You want to feed the tethers around the front and through the back of the seat on each side so they are *hugging* the joint of the seat. The way you have them wrapped is not correct.
 

molly&elle

New member
does this video show the correct way for the tethers?

[ame="http://www.youtube.com/watch?v=qel2LhfmTf8&NR=1"]YouTube - Fitting the Britax Multitech.www.incarsafetycentre.co.uk[/ame]
 

twinsmom

New member
You need to pull your footprop out away from the seat further. There should be an angle guide at the back of your manual to help you get the correct angle. The prop needs to move forward towards the front seat.
 

molly&elle

New member
Ok I stuffed a hand towel in the seat bight and moved the prop out more. Also I think I have the proper tether position. What do you think?

IMG_3302.jpg

IMG_3301.jpg

IMG_3300.jpg

IMG_3303.jpg
 

Car-Seat.Org Facebook Group

Forum statistics

Threads
219,659
Messages
2,196,907
Members
13,531
Latest member
jillianrose109

You must read your carseat and vehicle owner’s manual and understand any relevant state laws. These are the rules you must follow to restrain your children safely. All opinions at Car-Seat.Org are those of the individual author for informational purposes only, and do not necessarily reflect any policy or position of Carseat Media LLC. Car-Seat.Org makes no representations as to accuracy, completeness, currentness, suitability, or validity of any information on this site and will not be liable for any errors, omissions, or delays in this information or any losses, injuries, or damages arising from its display or use. All information is provided on an as-is basis. If you are unsure about information provided to you, please visit a local certified technician. Before posting or using our website you must read and agree to our TERMS.

Graco is a Proud Sponsor of Car-Seat.Org! Britax is a Proud Sponsor of Car-Seat.Org! Nuna Baby is a Proud Sponsor of Car-Seat.Org!

Please  Support Car-Seat.Org  with your purchases of infant, convertible, combination and boosters seats from our premier sponsors above.
Shop travel systems, strollers and baby gear from Britax, Chicco, Clek, Combi, Evenflo, First Years, Graco, Maxi-Cosi, Nuna, Safety 1st, Diono & more! ©2001-2022 Carseat Media LLC

Top