I've been searching the forums, but I haven't come across anyone who's mentioned this issue. The Radian installed in DH's car has a DOM of 10/05, so it was manufactured before SK started to include the SafeStop. When I found out the newer Radians came with the SafeStop, I called SK and they sent me a SafeStop to use with my older Radian. Since DS was RF up until a month ago, we've had no need to use it. However, when we turned DS FF, DH put the Safestop on the harness yoke, and the SafeStop strap actually ended up being partially *under* the Radian seat bottom. This made adjusting the harness strap damn near impossible. So, we took the SafeStop off the yoke, and figured not using it is OK because the Radians originally weren't sold with the SafeStop. This was when DS was still on the third-from-the-top harness slots.
We've since moved the harness up the second-from-the-top harness slots because DS went through a growth spurt. We totally forgot about the SafeStop, but I'm going to be uninstalling the Radian in a few weeks to put the Britax chest clip on once it arrives. So, I'll install the SafeStop on the harness yoke again and see if it lays flat against the back of the Radian shell, and not under it.
In the meantime, has anyone else had this problem with the SafeStop?
We've since moved the harness up the second-from-the-top harness slots because DS went through a growth spurt. We totally forgot about the SafeStop, but I'm going to be uninstalling the Radian in a few weeks to put the Britax chest clip on once it arrives. So, I'll install the SafeStop on the harness yoke again and see if it lays flat against the back of the Radian shell, and not under it.
In the meantime, has anyone else had this problem with the SafeStop?