Judi
CPST/Firefighter
Yesterday, I got to see Foonf 2.0. I will be showing pics of both. The green is 1.0, black is 2.0. There will be a couple more changes from 2.0.
Harness heights, without compression are 10" to 17". With compression, 10.5" to 17.5". RF to 45 lbs, FF to 65 lbs.
Changes so far:
- Latch anchors for rear facing now come from seat, not the wedge.
- Storage for latch is in the front of the seat.
- There will be RFing lock offs. There are not on this prototype.
- Headrest is farther back.
Now for a few pics.
Gap 1.0 VS 2.0. The headrest actually rubs the seat a little when it is all the way down.
The back:
Take off the cover, and here is what you see:
Under the seat cover:
Side view:
In action:
FR85, RF Foonf, RF TWE:
FF Foonf, FR85:
TWE VS Foonf:
TWE, 23"
Foonf, 26"
Blondie87, Whataboutpuppy and Caritas!
Caritas went today to see it again. Her pics can be seen here:
https://www.facebook.com/media/set/?set=a.3508974094383.2121179.1572750003&type=1
Harness heights, without compression are 10" to 17". With compression, 10.5" to 17.5". RF to 45 lbs, FF to 65 lbs.
Changes so far:
- Latch anchors for rear facing now come from seat, not the wedge.
- Storage for latch is in the front of the seat.
- There will be RFing lock offs. There are not on this prototype.
- Headrest is farther back.
Now for a few pics.
Gap 1.0 VS 2.0. The headrest actually rubs the seat a little when it is all the way down.
The back:
Take off the cover, and here is what you see:
Under the seat cover:
Side view:
In action:
FR85, RF Foonf, RF TWE:
FF Foonf, FR85:
TWE VS Foonf:
TWE, 23"
Foonf, 26"
Blondie87, Whataboutpuppy and Caritas!
Caritas went today to see it again. Her pics can be seen here:
https://www.facebook.com/media/set/?set=a.3508974094383.2121179.1572750003&type=1