I have a 2011 Subaru Outback. My children are SON: 2.5yr, 38'', 32lbs and DAUGHTER: 5yrs, 41", 42lbs. We own a Britax Advocate 70CS (circa 2010) and a Diono Radian RXT (circa 2012?)They were great for us when we were able to use LATCH in the two outboard positions (rear-facing). My daughter is now FF in the Britax (after 4.75 years RF!!!!!) and we are using LATCH but need to switch to seatbelt install ASAP as she is 1lb over the LATCH limits with the new laws. We have tried and tried to install a carseat (we've tried both) with the seatbelt and we just get SLOP! Like, 3 inches of side to side movement!!!! What are we doing wrong? I know there are some awesome installers out there who might have tips etc. I'm so distraught about this. I'm about to throw both seats in the trash and sell a kidney to buy the Foonf so I can still use LATCH and the seatbelt. Is there one of my seats that should be easier to install with the seatbelt? They just end up crooked and sloppy. (obviously we still want to rear-face our son, but they are okay switching seats if one is better in the FF position with the seatbelt).
HELP please!! If you know of good tutorial/vidoes etc that would be so helpful. My son is nearing the weight limit for LATCH with the Radian so we need to figure out how to seatbelt the Radian RF ASAP as well.
HELP please!! If you know of good tutorial/vidoes etc that would be so helpful. My son is nearing the weight limit for LATCH with the Radian so we need to figure out how to seatbelt the Radian RF ASAP as well.