Keyfit owners

crunchierthanthou · May 28, 2009

I need a favor.

can you take some measurements for me?

1- width of harness webbing

2- width of a buckle tongue
a- overall
b- opening for harness

3- width of splitter plate
a- overall
b- harness slot(s)

Jennifer mom to my 7 · May 28, 2009

crunchierthanthou said:
I need a favor.

can you take some measurements for me?

1- width of harness webbing

1.5 inches
2- width of a buckle tongue
a- overall

Not sure what you mean here the buckle tongue including the plastic is 1.75 inches, the metal that goes into the buckle itself is about 3/8ths of an inch
b- opening for harness

again not sure... but buckle is about 2 inches, and the holes for the tongues are about 1/2 inch
3- width of splitter plate
a- overall

splitter plate is about 3 inches across, where the harness attaches is about 1 inch long.
b- harness slot

The harness slots measure approx 7, 9, 11, without infant padding.(s)

Does this help?

crunchierthanthou · May 28, 2009

thanks. I think you got them except I'm looking for the width instead of the height of the harness opening in the buckle tongue (2b).

here's what I mean-

what I really want to know is if your hardware is the same, if the harness bunches like that and if it's been an issue.

hsjwmom · May 28, 2009

Yes, mine bunches that way. Never caused any problems.

SusanMae · May 28, 2009

Mine bunched a bit too. I don't remember it ever causing a problem.

Susan

seamonkeys · May 28, 2009

hsjwmom said:
Yes, mine bunches that way. Never caused any problems.

:yeahthat:

Jennifer mom to my 7 · May 28, 2009

Well why didn't you just say that

Not been an issue at all. The buckle tongue opening that I think you want is just shy of the 1.5 inch measurement of the harness webbing width. Every once in a while the strap will want to "start" to fold, but I just fix it

is that what you mean?

crunchierthanthou · May 28, 2009

Jennifer mom to my 7 said:
Well why didn't you just say that Not been an issue at all. The buckle tongue opening that I think you want is just shy of the 1.5 inch measurement of the harness webbing width. Every once in a while the strap will want to "start" to fold, but I just fix it is that what you mean?

Yes, that's what I mean.

I asked for the measurements to confirm that it is the same hardware. Interesting that it doesn't seem to bother anyone.

seamonkeys · May 28, 2009

hsjwmom said:
Yes, mine bunches that way. Never caused any problems.

I guess technically the harness doesn't bunch up in the buckle area, mine folds over at one side. I don't care for it doing that, but doesn't seem to harm it.

Keyfit owners

crunchierthanthou

New member

Jennifer mom to my 7

Well-known member

crunchierthanthou

New member

hsjwmom

New member

SusanMae

Senior Community Member

seamonkeys

New member

Jennifer mom to my 7

Well-known member

crunchierthanthou

New member

seamonkeys

New member

Car-Seat.Org Facebook Group

Sponsors

Forum statistics