Maestro base

Dorothy

New member

• May 20, 2011

• #1

Can someone post a pic of the bottom of the Maestro base, please? I need something w a flat base, and I'd rather not drive an hr+ to see one in-store if its not what I need. TIA

Sent from my Eris using Car-Seat.Org

 

Last edited: May 20, 2011

jujumum

Well-known member

• May 20, 2011

• #2

 

Dorothy

New member

• May 20, 2011

• #3

Yeah! Thanks so much.

Sent from my Eris using Car-Seat.Org

 

jujumum

Well-known member

• May 20, 2011

• #4

Did you mean from underneath? That is the pic I took.

 

Dorothy

New member

• May 20, 2011

• #5

Yes. Perfect! Thanks so much. I'll thank you proper when I get on the computer later. ;-)

Sent from my Eris using Car-Seat.Org

 

Dorothy

New member

• May 20, 2011

• #6

If you still have it handy, can you also take one of the base from the side?

Sent from my Eris using Car-Seat.Org

 

jujumum

Well-known member

• May 21, 2011

• #7

Here you go. Please note that it is missing the cup holders. We took them off to see how difficult it was (in case we need to pop them off to go through the airport security scanner).

 

Dorothy

New member

• May 21, 2011

• #8

Thank you so much!

Sent from my Eris using Car-Seat.Org

 

jourdysmom

CPST Instructor

• May 21, 2011

• #9

jujumum said:

Here you go. Please note that it is missing the cup holders. We took them off to see how difficult it was (in case we need to pop them off to go through the airport security scanner).

Click to expand...

Can you measure the distance from the back of the seat to where that cutout ends (toward the front) to make sure that she has enough depth to her seat? That would be awesome!

 

Dorothy

New member

• May 21, 2011

• #10

jourdysmom said:

Can you measure the distance from the back of the seat to where that cutout ends (toward the front) to make sure that she has enough depth to her seat? That would be awesome!

Click to expand...

That's exactly why I needed a side view- to see how deep that cutout is. You're right, though, that a measurement would be even better. Thank you for mentioning it!

Sent from my Eris using Car-Seat.Org

 

vonfirmath

New member

• May 21, 2011

• #11

When I took my Maestro on the plane they just wander the seat since it did not fit through the scanner. No biggie

Sent from my iPod touch using Car-Seat.Org

 

jujumum

Well-known member

• May 21, 2011

• #12

The whole base, from the very back to the very front is about 16". There is a slight curve at the front, so that where the harness adjuster is a full 16" deep, and where the leg type parts that have the cut outs are located is about 15 3/4".

From the very back, to the start of the cut out is about 3".

The cut out itself is around 7".

From the very back, to the end of the cut out is about 9 3/4" - 10".

The front bit, on the front side of the cut out, is about 6".

 

Dorothy

New member

• May 21, 2011

• #13

Thankyouthankyouthankyouthankyouthankyou...

Sent from my Eris using Car-Seat.Org