southpawboston
New member
from time to time our RF scenera would be really stubborn with the harness... getting caught up and not wanting to tighten, and sometimes the strap on one side would tighten but the other would be really loose.
i discovered that the problem is with the unused tether strap. cosco instructs it to be clipped to the FF foot rest (folded away for RF). but, the harness straps get sandwiched between the tether strap and the shell. if i take up all the slack on the tether so that it's nice and snug, the harness straps and splitter plate get sandwiched in too tight to slide up and down when trying to loosen and tighten the harness, and the splitter plate gets hung up on the tether strap. but if i loosen the slack on the tether strap, the harness problem goes away!
so if you have any harness sticking problems with a RF scenera, try loosening up the unused tether strap!
i discovered that the problem is with the unused tether strap. cosco instructs it to be clipped to the FF foot rest (folded away for RF). but, the harness straps get sandwiched between the tether strap and the shell. if i take up all the slack on the tether so that it's nice and snug, the harness straps and splitter plate get sandwiched in too tight to slide up and down when trying to loosen and tighten the harness, and the splitter plate gets hung up on the tether strap. but if i loosen the slack on the tether strap, the harness problem goes away!
so if you have any harness sticking problems with a RF scenera, try loosening up the unused tether strap!