WhatAboutPuppy
New member
Ok, let me start by saying, I am still really liking this seat. I think Graco did something really well here. I am NOT saying this seat will meet everyone's needs (far from it).
I am posting this to help people gain knowledge on how this seat operates so in a car seat check you wont be puzzled by much... cuz it really is a different convertible seat.
Earlier I kept saying it was sort of a box when people asked if it'd puzzle well next this or that...
Shell height at the highest head rest position (3) for rear facing is 24 inches... It may look a bit different, don't let the picture fool you!
This is probably stated in with the stats sheet but I was there. This is the 3rd position harness slot measurement without the infant padding.
Ok, ya ready? Here's where I want comments and opinions and such!
My car is pretty much on extremely level ground!
Bubble... seat in 3rd recline position...
Measured in the headrest while in the 3rd recline position.
Bubble... seat in 2nd recline position...
Now, I know Judi and I had talked quite a bit about not being able to quite get 45* and keep the bubble between the lines. And granted as i messed with pressing the padding flat and such it was between 43 and 45*. But Judi reminds me now that she couldn't get 45* lower where the noob would actually be laying...
Here's the infant padding. I think you can almost even see in the picture that the padding in the upper most part is not as thick as the rest...
Just resting on the padding at the bight...
This is the number I found very very interesting... And I want opinions... Would this in theory totally open up the noob's airway? Between that number and the 80's shoulder pads going on it seems like that head wouldn't even be able to THINK about slumping anywhere...
What it comes down to is that I want brand new squishy baby pictures in this seat! lol My friend is due at the end of this month! And I am working on getting pictures of a really cute 6 month old in it with infant padding shortly!
If you made it this far... you rock!
I am posting this to help people gain knowledge on how this seat operates so in a car seat check you wont be puzzled by much... cuz it really is a different convertible seat.
Earlier I kept saying it was sort of a box when people asked if it'd puzzle well next this or that...
Shell height at the highest head rest position (3) for rear facing is 24 inches... It may look a bit different, don't let the picture fool you!
This is probably stated in with the stats sheet but I was there. This is the 3rd position harness slot measurement without the infant padding.
Ok, ya ready? Here's where I want comments and opinions and such!
My car is pretty much on extremely level ground!
Bubble... seat in 3rd recline position...
Measured in the headrest while in the 3rd recline position.
Bubble... seat in 2nd recline position...
Now, I know Judi and I had talked quite a bit about not being able to quite get 45* and keep the bubble between the lines. And granted as i messed with pressing the padding flat and such it was between 43 and 45*. But Judi reminds me now that she couldn't get 45* lower where the noob would actually be laying...
Here's the infant padding. I think you can almost even see in the picture that the padding in the upper most part is not as thick as the rest...
Just resting on the padding at the bight...
This is the number I found very very interesting... And I want opinions... Would this in theory totally open up the noob's airway? Between that number and the 80's shoulder pads going on it seems like that head wouldn't even be able to THINK about slumping anywhere...
What it comes down to is that I want brand new squishy baby pictures in this seat! lol My friend is due at the end of this month! And I am working on getting pictures of a really cute 6 month old in it with infant padding shortly!
If you made it this far... you rock!