MomToEliEm
Moderator
Evenflo Serenade
Shopping Link - Evenflo Serenade
Instruction Manual
Stated Limits:
Weight Range: 5 - 35 lbs.
Height Range: 19 - 32 in.
Measurements:
Lowest Harness Height: 6 in.
Highest Harness Height: 12 in.
Shortest Buckle Position: 4.5 in.
Longest Buckle Position: 6 in.
Crotch Buckle Length: 4 in.
Internal Seating Depth: 11.5
Internal Seating Height: 20 in.
Internal Bottom Width: 9 in.
External Seat Width: 18.25 in.
Seat Weight: 10 lb.
Other Information:
Lock-offs Provided: Does not have Lock-offs
Seat Modes: With/Without Base
Expiration Limit: 8 yrs from mfg. Date
Allowed Handle Positions in Vehicle: Handle must be down-- top of shell or all the way behind shell, in resting position-- in a locked position. Handle MUST have 1.5 inches clearance from seat in front.
Comments:
* Has "SureLATCH" self-retracting LATCH connectors, which may not fit well in some LATCH-equipped cars depending on the location and positioning of the lower anchors.
* When used in a vehicle, the handle must be down with 1.5 in. clearance between the handle and the front seat. This requirement may prevent seat from fitting in some vehicles.
* Harness appears short - so while a heavier 1 year old will probably still fit by height, the harness will be difficult to adjust because there is not a lot of slack.
* The base is heavier than many infant seat bases, which seems to reduce the tipping that can be caused by a locking retractor.
Shopping Link - Evenflo Serenade
Instruction Manual
Stated Limits:
Weight Range: 5 - 35 lbs.
Height Range: 19 - 32 in.
Measurements:
Lowest Harness Height: 6 in.
Highest Harness Height: 12 in.
Shortest Buckle Position: 4.5 in.
Longest Buckle Position: 6 in.
Crotch Buckle Length: 4 in.
Internal Seating Depth: 11.5
Internal Seating Height: 20 in.
Internal Bottom Width: 9 in.
External Seat Width: 18.25 in.
Seat Weight: 10 lb.
Other Information:
Lock-offs Provided: Does not have Lock-offs
Seat Modes: With/Without Base
Expiration Limit: 8 yrs from mfg. Date
Allowed Handle Positions in Vehicle: Handle must be down-- top of shell or all the way behind shell, in resting position-- in a locked position. Handle MUST have 1.5 inches clearance from seat in front.
Comments:
* Has "SureLATCH" self-retracting LATCH connectors, which may not fit well in some LATCH-equipped cars depending on the location and positioning of the lower anchors.
* When used in a vehicle, the handle must be down with 1.5 in. clearance between the handle and the front seat. This requirement may prevent seat from fitting in some vehicles.
* Harness appears short - so while a heavier 1 year old will probably still fit by height, the harness will be difficult to adjust because there is not a lot of slack.
* The base is heavier than many infant seat bases, which seems to reduce the tipping that can be caused by a locking retractor.