Can you Rear Face tether in an ES350/Camry?

[codex57]

We have a Lexus ES350. Basically the same car as the Camry. I can't seem to find any place to put the tether when it's rear facing. We're using a Britax Blvd and it says to try using the anchor of one of the front seats. Well, I can't seem to find any hole or bar to loop that universal connector thing. Part of the anchor is covered by a plastic piece (presumably to make things prettier down there). Has anyone checked under there? I'd rather not pry up trim pieces that I'm not sure are meant to be removed.

[crunchierthanthou]

Can you take a picture of the under side of the seat? Maybe we can help you spot something. Those plastic trim pieces usually pop right off.

[codex57]

I'll try and do it this weekend. DW took the car today.

[tiggercat]

I drive a 2003 Camry, if it's the same as mine those plastic pieces pop off reasonably easily, and are easy to put back on. As long as you don't force it, it won't break. I had to remove them to feed the D-ring under the seat track and around it's base. Let me see if I have a picture.