GN backless Will this work like this?

[mburks26]

This is not being used this way. DD will stay harnessed in the GN til its outgrown. The GN will not work in HBB due to the height. I can not raise the GN head rest up past the top harness spot.

Here is the GN backless installed in the 95 civic 2 door with the female end untwisted (I had posted pics of it installed with it twisted and it was really a no go the red realse button was up against the GN or the middle seat)

Will this work?

http://i153.photobucket.com/albums/s211/angelchelle_26/DSCI2058.jpg


the GN is not sitting on the webbing there is a space there its hard to explain. None of the red relase button is touching the seat.

I can move the GN over but then it would be half on the rasied side and half not and be loopsided and I did have dd sit in it while it was on the raised side and well she would fall towards the center

http://i153.photobucket.com/albums/s211/angelchelle_26/DSCI2056.jpg


here the GN from the front


http://i153.photobucket.com/albums/s211/angelchelle_26/DSCI2059.jpg


If I measured right I got 12 inches for the GN where it sits on the seat and from raised side to raised side in the car I get 12 inches.