PDA

View Full Version : Pics of Regent in 08 Toyota Corolla

Auntie2Avi
03-24-2008, 12:39 AM
I have finally gotten the pics online of the Regent in my 08 Corolla. I was only able to get a solid install if I twisted the bottom part of the belt twice. I wasn't sure if I should twist it again because it was still in the belt path a tiny tiny bit. Minismom met me and was a great help in getting the Regent into the car!!

Here are the pics:

Belt twisted two full times

http://i45.photobucket.com/albums/f56/Loves2bake_23/IMG_0592.jpg

Buckle is very slightly in the belt path

http://i45.photobucket.com/albums/f56/Loves2bake_23/IMG_0591.jpg

Other side of the shoulder belt

http://i45.photobucket.com/albums/f56/Loves2bake_23/IMG_0593.jpg

Look how big Avi is, close to the top of the slots he is using, I need to put a better pic up tomorrow showing his shoulder room

http://i45.photobucket.com/albums/f56/Loves2bake_23/IMG_0590.jpg

Thanks for any input!!
jen_nah
03-24-2008, 11:28 AM
You can safely twist the belt stalk (female end) up to 3 full twists. I would give it one more twist and I would say it would be a perfect install.
Defrost
03-24-2008, 11:53 AM
I love the sunglasses - so cool! :cool:

If you can't get the buckle stalk to twist anymore, it *looks* like it's okay where it's at. It's so hard to tell from pics, but it *looks* like the seat belt is well-contacted with the belt path. I get a similar install in my Golf - the buckle "peeks" into the belt path but doesn't interfere with the install.

Again, so hard to tell from pics!
MomToEliEm
03-24-2008, 12:05 PM
That looks about the same as my regent in my Toyota Camry. The buckle sticks into the belt path a little. I think I twisted mine once or twice to bring it down just enough that it couldn't be belt through the cover.
Unregistered
04-17-2008, 02:38 PM
Can anyone provide pics of where the tether anchors are attached in the Corolla for a FF seat (maybe a pic taken from the trunk and one from the inside of the car)? I have a Geo Prizm which is supposed to be the same as the Corolla... and I need to drill the holes to attach the tether anchors (which I got from Toyota), but have not seen a picture of where I am supposed to be drilling. A LONG time ago there used to be a site with pics like this for the Geo Prizm -- but it has been taken down. Thx