PDA

View Full Version : Another LATCH manual question


ThreeBeans
11-25-2007, 02:58 PM
Gosh, i can't wait till mine comes in the mail :p

Can someone look up lower anchor and top tether positions for a 2005 Ford Freestar? Danke.

crunchierthanthou
11-25-2007, 03:13 PM
I'm still waiting for mine too (any recent update on that?). I remembered it came up recently and a quick search yielded this:

It has 3 full sets of LATCH- two second row and one third row center.

For the second row captain chairs, there should be tether anchors on the bottom rear of the seat. For the third row, outboard, there are no tether anchors.

Second row bench - lower anchors are spaced to provide either 2 outboard or 1 center installation. Use either outboard tether anchor for center installation.

ThreeBeans
11-25-2007, 03:33 PM
Whoa, so they downgraded from 4 in the Windstar to three in the Freestar? What the heck? :thumbsdown:

Are the belts switchables or locking latchplates?

Jeanum
11-25-2007, 04:12 PM
To supplement the above info, the LATCH manual indicates if it's a Freestar with the second row bench, the outboard lower LATCH anchors are spaced to allow a center LATCH install or 2 outboard LATCH installations, and you can use either outboard tether anchor for a second row center install (tether anchors are on the bottom rear of the seatback). :)

I know the Windstar had locking latchplates, at least the 2000 model I was recently in did, but I'm not positive if this is true of the Freestar. I think Papooses has/had a Freestar and could address the seatbelt type for you if you flag her down or PM her.

crunchierthanthou
11-26-2007, 06:54 PM
To supplement the above info, the LATCH manual indicates if it's a Freestar with the second row bench, the outboard lower LATCH anchors are spaced to allow a center LATCH install or 2 outboard LATCH installations, and you can use either outboard tether anchor for a second row center install (tether anchors are on the bottom rear of the seatback). :)



You mean this info? ;)


Second row bench - lower anchors are spaced to provide either 2 outboard or 1 center installation. Use either outboard tether anchor for center installation.

Jeanum
11-26-2007, 08:33 PM
ROFL, there was an echo in here, eh? That's what I get for posting while multi-tasking. :p ;) Oh well, always good to have two answers in agreement and a lead on the seatbelt info. :whistle:

ThreeBeans
11-26-2007, 08:38 PM
As an update, all the belts save the driver's of course are switchables :)

Jeanum
11-26-2007, 08:41 PM
Switchables, good to know. :thumbsup: