Tether anchor for Regent in 1999 Ford Expedition Eddie Bauer...

[SingleMomTo2Girls]

I'm getting a 42lbs 5 year old out of a lap only belt and back into a Regent. It's much to my dismay the only higher weight limit seat that will work for this family.

I am just curious if the 1999 Ford Expedition has tether anchors at all. If not, can I get the part numbers for her?

Anyone have experience installing a Regent in one?

[azgirl71]

I'm getting a 42lbs 5 year old out of a lap only belt and back into a Regent. It's much to my dismay the only higher weight limit seat that will work for this family.

I am just curious if the 1999 Ford Expedition has tether anchors at all. If not, can I get the part numbers for her?

Anyone have experience installing a Regent in one?

They are available. The LATCH manual says....

97-99 Ford Expedition

Front seat: TA-Drilled hole in lower cross bar of seat cushion frame. See notes.

2nd row
Center: F75Z78613D74-AA Drill dimple in floor
Outboard: F75Z78613D74-AA (2) drill dimples alonf front edge of load floor

3rd Row
center: NONE
Outboard: NONE

Notes: Front seat: Instructions say to remove vehicle seat, but this is not necessary.Anchor point canbe accessed without seat removal.

Dealership Installation program: For 989 and later models Ford will pay their dealer to install tether anchors. (Program R7C)